Install - Photo >>
Installation and Photo
The Eazy Mow swivel wheel system contains all the parts you need to convert your walk-behind
lawn mower into a zero-turn swivel wheel mower including 2 casters and wheels, 2 adjustment plates, 2 pivot arms, 2 grip
knobs and all the nuts, bolts, and fastners you will need to quickly and easily do your conversion. The Eazy Mow User's
Guide and Assembly Parts Manual is shipped with each product. Illustrations and simple, easy to read directions for assembly
are provided.The following illustrations are the 4 easy steps for mounting Eazy Mow on the right front of your mower. Left front illustrations are not shown but follow the same easy directions. Eazy Mow replaces one set of wheels and height adjusters and mounts to your mower frame hole pattern. Eazy Mow upgrades
your mower to a swivel wheel mower by replacing the standard front wheels and height adjusters on walk-behind
push mowers and self-propelled rear wheel drive mowers. It also replaces the rear wheels and height adjusters on most self-propelled front wheel drive mowers.
We also have included below a few examples of the many different brands and models
mowers with which Eazy Mow is compatible. Eazy Mow fits virtually all brands and models manufactured from 1981 to
Step 1. Remove the right front factory wheel and height adjuster assembly
(one bolt and nut in most
Step 2. In most cases our Adjustment Plate will mount using your factory mounting holes.
Depending on you mower make and model you may need to either enlarge or add a hole for mounting purposes. Our
product should be installed using two bolts, nuts and lock washers included for added security.
Step 3. The pivot (wheel) arm is attached securely to the adjustment plate with a locking
spring pin and a securing mechanism. When the spring pin is released the pivot (wheel)
arm slides vertically for quick and easy height adjustment operation.
Step 4. The caster wheel housing is designed with a special fitting that seats
into the pivot (wheel) arm and is held securely with a 1/2" lock nut and washer. Tools required:
Socket or wrench for mower frame bolt. 3/4" socket or wrench to secure 1/2" lock nut.
just a few minutes. It's that simple!
A Few Examples with Eazy Mow
Standard push mower
Front wheel drive propelled mower
Hi-wheel push mower
Rear wheel drive propelled mower
Standard push mower